Today's hairstyle post is about historical reenactment and the Middle Ages - The updo I wore for my late 15th Century Burgundian reenactment, under a conical hennin:
I actually debuted this reenactment at a Tolkien convention, so all these pics are a
Noldorin Elven version (those are actually Vulcan ears, I didn't have any Elven ears at that point xD). 15th Century Burgundian fashion wasn’t a headcanon of
mine for Elven fashion before this, but I can totally see the (in my
headcanon at least) quite fashion-extravagant Noldor wearing this kind of
court fashion xD And the looped braids kind of showcase the pointy ears,
too!
The hairstyle is something that can easily be worn under the hennin, and
it’s also inspired in what can be seen of the hair (ugh for the patriarchal modesty mindsets :S) in illuminations from the time - There
are examples of looped braids that show under the hennin (1, 2, 3), and examples of the hair being worn in a high bun under the hennin. In my case, it’s a braided high bun with a paranda (no foam donut in my case,
although that’s another option). The two front accent braids are braided with
golden cord and looped around the ear, crisscrossed and tucked around
the bun. For an alternative Elven-inspired style, those front braids
could also be worn hanging loose (this is actually how this Burgundian woman wears her hair, too!)
- For this style I used:
-Comb and/or brush as needed.
-A metal-free elastic for the initial ponytail
-Paranda for the braided ponytail (or a foam donut, or both. Both resulted in an overlarge, too heavy bun in my case).
-Paranda for the braided ponytail (or a foam donut, or both. Both resulted in an overlarge, too heavy bun in my case).
-Lots and lots of pins (open bun pins and closed bobby pins. Like, LOTS.
-Fixator, like hairspray
-Tangle Teazer to untangle the root backcombing easily and damage-free. Baby brush to brush off the hairspray and smooth all the hair
Steps:-Tangle Teazer to untangle the root backcombing easily and damage-free. Baby brush to brush off the hairspray and smooth all the hair
- Hairstyle:
-Separate two front sections and braid to create the accent braids. Add cord or ribbon as a decorative effect if desired.
-Pull the rest of the hair into a high ponytail - relatively high on the head in order to be able to put on the hat/headdress easily later.
-Braid the ponytail, with a paranda for added volume (tutorial here). Other options: High donut bun, unbraided, or braided bun without paranda and a donut bun in order to give more volume (a relatively voluminous bun is desirable to serve as an anchor for the hat).
-Coil the braid around the ponytail base in order to create a braided bun. I secured it with two metal bun pins - Something that looks relatively historically accurate, and that doesn't protrude much from the bun, in order not to interfere with the hat later.
-Loop the front accent braids around and over the ears, crisscrossing them at the front and coiling them around the bun.
- Hennin:
-Wrap velvet band at the hairline and tie at the back. This band serves as anchor in order to secure the hat.
-Put on hennin over the bun. Further secure it with another velvet band tied over the base directly above the other band. This should keep the hennin from sliding back.-Pin decorative veil over the hennin as desired.
More about hennin construction:
Materials I used:
Buckram/burlap fabric for the base (two layers), wire, long wood sticks
(3X),
dark red and gold patterned damask
for the lining, normal thread to sew it all. Gold organza for the veil
and black velvet for the strips that hold the hennin in place.
Also, some tutorials I studied for this project: Steeple hennin , truncated hennin, another truncated hennin. And my Pinterest board with references.
Fabrics and materials: Gold organza for the veil, black velvet for the strips holding the hennin in place, dark red and gold damask for the lining, burlap/buckram for the base, wire and long wooden sticks.
Initial fabrics test with the materials and a 'fairy/princess' conical hat I've had since I was a child xD (you see the veil from that costume hat popping out there)
Cutting out the shape for the base (two layers):
Initial test of the hennin form with the two layers of burlap cloth and the damask:
Sewing long wood sticks to the first layer of the burlap base to keep the shape and stop the heavy fabric (plus the lining afterwards) from buckling under its weight
Sewed a second layer of burlap over the first one, and added wire around the circumference to further help keep the shape.
Damask lining, and the hennin is complete! Veil is held in place with pins (decorative or not), and velvet strips (one over the hair and beneath the hat, the other over it) keep the hennin in place. The velvet strips I tie at the back of the head and that really keeps the hennin secure with no need for further support.
Also sewed the U-front hook that helps adjust the hennin as well:
Another final test at the Tolkien con while wearing another Elven cosplay:
SwordWomanRiona / rionashairblog.blogspot.com.es
If you copy-and-paste this post and/or alter it without any
permission, credit or link, you're stealing my content. In that case,
please stop. Please ask before using my work, or at least share it
properly, giving credit to me and my blog.
